What aspects should be considered when selecting screw air compressor?

1. Consider the operating temperature of Atlas air compressor
Working temperature refers to the ambient temperature where the air compressor works. If the ambient temperature is low, there will be no bad effect; However, if the air compressor is started at a very low temperature (below 0 ℃), it should be noted that the lubricating oil should be carefully condensed inside. If the temperature of the operating environment is relatively high, corresponding cooling measures shall be taken, and lubricating oil with high viscosity and flash point shall be selected.
2. Consider the speed of the air compressor
Rotating speed is an important parameter of screw air compressor, so the rotating speed should be appropriate. If the speed is too low, the exhaust volume and exhaust pressure can not meet the requirements of working conditions, and "oil leakage" will be serious. If the speed of the air compressor is too high, the rotor will not be able to bear it, and the service life of the air compressor will be greatly shortened.
3. Consider the service environment of Atlas air compressor
The use environment of the air compressor is mainly the site selection of the air compressor room. The air compressor should be placed in a well ventilated place to avoid direct sunlight and rain; And the air humidity should be low, and there should be less dust and impurities in the surrounding air; Determine the position of the air compressor room according to this standard.
4. Lubrication method of air compressor
Screw air compressor lubrication can be divided into two types: oil lubrication and oil-free lubrication. At present, oil lubricated screw air compressor is widely used in the market, and almost all kinds of gas needs can be met through post-treatment equipment; The price of oil-free screw machine is relatively high, which is suitable for industries with high requirements for compressed air quality, such as medicine, food, etc.