Cold dryer filter configuration in the whole compressed air system, in addition to air compressor compressed air, also need dryer filter to improve the quality of compressed air. What size of dryer filter should the air compressor be equipped with?

        What size of dryer should the air compressor be equipped with:

        In the rated working condition, the dryer should be configured according to the exhaust volume of the air compressor. Generally, the proportion of the air compressor with the dryer is 1:1, such as the air compressor with 3 cubic meters per minute, and the dryer equipment with 3 cubic meters of processing gas. Of course, in the configuration of dryer should not be small, such as 11 cubic air compressor, not to save cost to choose 10 cubic dryer, should choose 12 cubic dryer.

        What size of filter should be equipped for the cold dryer:

        In fact, the compressed air filter is not the size of the points, only the level of points. For the filter installed in front of the dryer, the pre filter, primary filter, pre filter and other filters with low accuracy should be selected. The prefilter generally removes particles and liquid water with a diameter of 3-5 μ m, and the primary filter generally removes particles and liquid water with a diameter of 0.5-1 μ M. A precision filter should be installed at the back end of the dryer to filter the dust in the compressed air. The fine filter generally removes particles and dust with a diameter of 0.01 μ M. The installation principle of the filter is the first three and the last one, which means that three filters are installed at the front end of the dryer, and a precision filter is installed at the back end of the dryer, so as to meet the high-quality demand of the enterprises for compressed air